Download Now
ASRock H61M-GS Intel Graphics Driver

ASRock H61M-VG3 Motherboard Core i7/i5/i3 Socket H61 mATX Gigabit LAN (Integrated Graphics) [H61M-VG3]. (No reviews yet) Write a Review. The ASRock H61M-GS is compatible with Intel processors with the LGA This allows for integrated graphics when paired with a compatible CPU that supports. Download ASRock H61M-GS Realtek HD Audio Driver Beta for Supports Intel HD Graphics Built-in Visuals: Intel Quick Sync Video.


Type: Driver
327 (3.85)
Downloads: 507
File Size: 7.77Mb
Supported systems: Windows 10, Windows 8.1, Windows 7
Price: Free* [*Free Registration Required]

Download Now
ASRock H61M-GS Intel Graphics Driver


Please refer to below steps for the software setting of Multi-Streaming. For Windows XP: After restarting your computer, you will find Mixer tool on your system. Please select Mixer ToolBoxclick Enable playback multi-streaming, and click ok. Then reboot your system. Set Speaker Configuration to Quadraphonic or Stereo.

▷ **B Grade** ASRock H61M-GS Intel H61 (Socket … OcUK

Click Device advanced settings, choose Make front and rear output devices playbacks two different audio streams simultaneously, and click ok. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power ASRock H61M-GS Intel Graphics before installing or removing the motherboard.

Failure to do so may cause physical injuries to you and damages to motherboard components. Do not over-tighten the screws! Doing so may damage the motherboard.


ASRock H61M-GS Intel Graphics Unplug the power cord from the wall socket before touching any component. ASRock H61M-GS Intel Graphics avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.

Drivers - Windows 8 AMD catalyst display adapter - Super User

Before you install or remove any component, ensure that ASRock H61M-GS Intel Graphics power is switched off or the power cord is detached from the power supply. Do not force to insert the CPU into the socket if above situation is found.

  • ASRock H61M-GS - Socket - Micro-ATX Komplett
  • Compatible Motherboards
  • ASRock H61M-GS Motherboard Core i7/i5/i3 Socket 1155 H61 mATX Gigabit LAN (Intel HD Graphics)

Otherwise, the CPU will be seriously damaged. Step 1.

ASRock H61M-GS User Manual (Page 80 of )

Open the socket: Step Disengaging the lever by depressing down and out on ASRock H61M-GS Intel Graphics hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees. Step 2.


It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.

Insert the Pin CPU: Hold the CPU by the edge where is marked with black line. Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion.

Verify that the CPU is within the socket and properly mated to the orient keys. Step 4. Close the socket: Rotate the load plate onto the IHS.

While pressing down lightly on load plate, engage the load lever. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat.

Relevant Drivers