Asrock K8A780LM SATA Driver
Best PC compatible ASRock ASRock K8ALM Motherboard. Build a ASRock The ASRock K8ALM has 4 SATA hard drive slots. Fujitsu Mainboard Intel Sockel SATA PCIe IDE USB für Futro Asrock K8ALM DDR 4x SATA RAID mATX 12x USB IDE FDD DVI LPT. Asrock K8ALM AMD AHCI Compatible RAID Controller, AMD AHCI Compatible RAID Controller - DC, AMD RAID Console, AMD SATA Controller.
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* [*Free Registration Required]|
Asrock K8A780LM SATA Driver
Connect fan header with the CPU fan connector on the motherboard. Secure excess cable with tie-wrap Asrock K8A780LM SATA ensure cable does not interfere with fan operation or contact other components.
Unlock a DIMM Asrock K8A780LM SATA by pressing the retaining clips outward. PCI slots: AGP slot: The AGP slot is used to install a graphics card. Please do NOT use a 3. PCI Express Graphics slot: Installing an expansion card Step 1.
Download AMD AHCI compatible SATA RAID controllers Driver [make Floppy Disk]
Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the Asrock K8A780LM SATA card and make necessary hardware settings for the card before you start the installation.
Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use.
Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Fasten the card to the chassis with screws.
AMD Socket Motherboard buy at
Replace the system cover. For the detailed instruction, please refer to the document at the following path in the Support CD When the jumper cap is placed on pins, the jumper is Short. If no jumper cap is placed on pins, the jumper is Open. The illustration shows a 3-pin jumper whose pin1 and pin2 are Short when Asrock K8A780LM SATA cap is placed on these 2 pins.
The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters Asrock K8A780LM SATA default setup, please turn off the computer and unplug the power cord from the power supply. Do NOT place jumper caps over these headers and connectors.
Asrock K8A780LM SATA Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Please refer to the instruction of your IDE device Asrock K8A780LM SATA for the details. Then connect the white end of SATA power cable to the power connector of the power supply.
ASRock AMD Gb -- Mali Oglasi #
USB 2. Each USB 2. Please follow the instruction in our manual and chassis manual to install your system.