Download Now
Asrock P67 Extreme4 Gen3 Rapid Storage Driver

Thank you for purchasing ASRock P67 Extreme4 Gen3 motherboard, a reliable motherboard RAID 1, RAID 10, RAID 5 and Intel Rapid Storage), NCQ. Asrock P67 Extreme4 Gen3 Owner S Manual Gen3_UM .. RAID 10, RAID 5 and Intel Rapid Storage), NCQ, AHCI and Hot Plug functions - 4 x. Description:Intel Rapid Storage Technology driver and utility for ASRock P67 Extreme4 Gen3 Intel Rapid Storage Technology driver and utility ver


ASROCK P67 EXTREME4 GEN3 RAPID STORAGE DRIVER (2019)

Type: Driver
Rating:
3.43
251 (3.43)
Downloads: 723
File Size: 10.39Mb
Supported systems: Windows All
Price: Free* [*Free Registration Required]

Download Now
Asrock P67 Extreme4 Gen3 Rapid Storage Driver

For EuP ready power supply selection, we recommend you checking with the power supply manufacturer for more details.

USB4 B: USB0 B: USB2 B: Debug USB 2. See the table below for connection details in accordance with the type of speaker you use.

Asrock P67 Extreme4 Gen3 Owner S Manual Gen3_UM

Installation This is an ATX form factor Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components. Do not over-tighten the screws! Doing so may damage the motherboard.

Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like.

ASROCK P67 EXTREME4 GEN3 RAPID STORAGE DRIVER FOR WINDOWS DOWNLOAD

Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Before you install or remove any component, ensure that Asrock P67 Extreme4 Gen3 Rapid Storage power is switched off or the power cord is detached from the power supply.

Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Step 1. Open the socket: Step Disengaging the lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees.

Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.

This cap must be placed if returning the motherboard for after service. Hold the CPU by the edge where is marked with black line.

Asrock P67 Extreme4 Gen3 Owner S Manual Gen3_UM

Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 4.

ASROCK P67 EXTREME4 GEN3 RAPID STORAGE DRIVER DOWNLOAD

Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat.

Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other.

P67 Extreme 4 Gen 3, two 3TB drives, can't do RAID1?

For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPU.

ASROCK P67 EXTREME4 GEN3 RAPID STORAGE DRIVER

Apply thermal interface material onto center of IHS on the socket surface.

Relevant Drivers