ASRock 960GM-S3 FX XFast RAM Driver
Код товара: GM-VGS3 FX Гарантия: 24 месяцев . ASRock XFast RAM XFast RAM will create a virtual disk from the system memory to boost the Standby mode (S1), Suspend to RAM (S3), hibernation mode (S4) or power off (S5). Скачайте драйверы на Asrock GM-S3 FX для Windows XP, Windows Vista, н/д, н/д, Другое, ASRock XFast RAM Utility ver, Скачать MB. GM-S3 FXAdd to comparison Due to the operating system limitation, the actual memory size may be less than 4GB for the ASRock XFast RAM.
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP|
|Price:||Free* [*Free Registration Required]|
ASRock 960GM-S3 FX XFast RAM Driver
To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.
EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1. For EuP ready power supply selection, we recommend you checking with the power supply manufacturer for more details.
Asrock GM-S3 FX драйверы
RJ 7 USB2 B: USB0 B: Please refer to below steps for the software setting of Multi-Streaming. Then reboot your system. Before you ASRock 960GM-S3 FX XFast RAM the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Unplug the power cord from the wall socket before touching any component.
To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.
Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.
When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. Step 2. ASRock 960GM-S3 FX XFast RAM 3. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle.
ASRock > GM-VGS3 FX
Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. Step 4. The lever clicks on the side tab to indicate that it is locked.
ASROCK GM-VS3 FX USER MANUAL Pdf Download.
You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Asrock 960GM-VGS3 FX
PCI slots: PCIE slots: Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the ASRock 960GM-S3 FX XFast RAM cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.