Download Now
AirLive WL-8000AP Driver

Factory Default Settings for the OvisLink WLAP access point Username / Password; admin / airlive33%; none / %; none / admin16%; none. b/g Access Point. WLAP. User's Guide. Page 2. -. FCC Certifications. This equipment has been tested and found to comply with the limits for a Class. Feature. Performance and Compatibility The AirLive WLAP is a Mbps Wireless Access Point with outstanding performance at an very competitive price.


Type: Driver
151 (3.43)
Downloads: 776
File Size: 7.63Mb
Supported systems: Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit
Price: Free* [*Free Registration Required]

Download Now
AirLive WL-8000AP Driver

Also, remember to adjust the antenna; usually the antenna is placed higher, the performance will be better.


Connect to your local area network: Connect an Ethernet cable to the Ethernet port of this Wireless Access Point, and the other end to AirLive WL-8000AP hub, switch, router, or another wireless access point. Power on the device: Check the LEDs: Configure your PC: Make sure your local PC s has AirLive WL-8000AP network adapter installed.

Start your computer. Connect an Ethernet cable between your computer and the Wireless Access Point.

Make sure your wired station is set to the same subnet as the Wireless Access Point, i. Start your AirLive WL-8000AP browser. In the Address box, enter the following: The details for the configuration menu are described as follows.


FW Version The current version of the AirLive WL-8000AP installed in this device. SW Version The current version of the software installed in this device. It is case-sensitive and must not exceed 32 characters.

It must be identical for all points in the network. Make sure that all points in the network are the same.

OvisLink AirLive WLAP - WikiDevi

Channel The number of channels supported depends on the region of this Access Point. All stations communicating with the Access Point must use the same channel.

Save After completing the settings, Click Save to save the settings. Cancel Click Cancel to discard the data you have entered since last time you press Save.

  • AirLive WLAP manual
  • OvisLink->Products
  • AirLive WL-8000AP manual

Beacon Period Beacon Period is the amount of time between beacon transmissions. Before a station enters power save mode, the station needs the beacon period AirLive WL-8000AP know when to wake up to receive the beacon and learn whether there are buffered frames at the access point.

The default value is A DTIM is a countdown field informing clients of the next window for listening to broadcast and multicast messages. Access point clients hear and awaken to receive the broadcast and multicast messages. This value is recommended to remain AirLive WL-8000AP its default setting of Should you encounter inconsistent Page: Fragment Threshold Fragmentation mechanism is used for improving the AirLive WL-8000AP when high traffic flows along in the wireless network.

The value can be set AirLive WL-8000AP to Output Power Level You can choose the percentage of maximum power to meet your requirement.

Relevant Drivers